Measurement of meteorological parameters is the essential part of any project for defining the design criteria, asses the environmental parameters, navigational safety etc...

Systems basically measure;

Atmospheric Parameters:

Wind Speed, Gust Direction Air Pressure Air Temperature Visibility Other requested parameters depending on the project requirement.

Depending on the geographical and other conditions such as VHF communication, appropriate communication system for data transferring can be installed.

Depending on the site conditions Communication System shall be; VHF/UHF Radio System Radio Modem System GPRS System

Receiver Station

Incoming data is stored in the local network and visualized through AADI'S 3710 software.

System is fully integrated with Doppler current profilers in order to supply full meteooceanographic data to Client

Installation of Meteo-oceanographic station process has following phases;

Feasibility

Prior to start of work site trip shall be performed to understand geographical and other conditions to determine locations of sensors and appropriate communication system together with Customer requirements.

Providing Required Equipment

After the completion of feasibility study required equipment is ordered from manufacturer. During this period required frames and any other protective structure is designed and manufactured.

Installation and Deployment of System

Completing the custom clearance of the equipment system installation of equipment is started.
Underwater data cable deployment, frame installation, receiver station installation (computer center) and any other required activities are completed.

System Test and Calibration

All systems shall be tested and calibrated accordingly prior to delivery of the system

Training and Maintenance

All information, data storage and sharing protocols shall be supplied to client personnel. Maintenance of system and any required consulting service is supplied upon customer request.